Free DIY calculator
Deck stain calculator: how many gallons of stain does my deck need?
A gallon of semi-transparent deck stain covers about 200 square feet per coat on weathered wood — 150 on rough boards, 250 on smooth new ones — so the question is really how many square feet your deck is. Measure the length and width, multiply by coats, and divide by the coverage on the can. A 16 by 12 foot deck needs 2 gallons for two coats, and this calculator does the same maths for any deck.
Last updated: November 17, 2026.
Estimate only — check your supplier's current price and local code before ordering.
Tired of chasing manually? Let Invoice Chaser run the day 7, 14 and 30 reminder sequence automatically — free for up to 3 invoices.
How do you work out how many gallons of deck stain you need?
Three pieces of arithmetic, all from the deck itself:
- Deck area. Length times width. A 16 × 12 ft deck is 16 × 12 = 192 sq ft.
- Total area to cover. Deck area times coats. Two coats on that deck is 192 × 2 = 384 sq ft.
- Gallons. Total area divided by the coverage per gallon printed on the can, then round up to whole gallons — stain is sold by the gallon, not the tenth. 384 ÷ 200 = 1.92 gallons, so buy 2 gallons.
The 200 sq ft per gallon default is the mid-range for semi-transparent stain on weathered wood. Rough, weathered boards drink more stain, so use 150 sq ft per gallon for them; smooth new wood stretches a gallon to about 250 sq ft. Always check the coverage printed on your own can and type it in if it differs — the label beats any default.
One honest caveat: this calculator counts every coat the same, but a second coat usually goes further than the first, because the first coat has already filled the open wood fibres. Field guides put the second coat at 30 to 50 percent further on penetrating oil stains, so the buy figure here is deliberately conservative — expect a little stain left over for touch-ups rather than running short mid-deck.
How much stain does a 16 by 12 foot deck need?
A 16 × 12 ft deck, 2 coats, 200 sq ft per gallon:
- Deck area: 16 × 12 = 192 sq ft
- Total area to cover: 192 × 2 = 384 sq ft
- Exact gallons: 384 ÷ 200 = 1.92 gallons
- Buy: round 1.92 up to 2 gallons
The second gallon is mostly spare — you use 1.92 gallons and keep about a tenth of a gallon for touch-ups. That is the honest reason to round up rather than down: a shortfall means a second trip to the store and a visible difference between batches on a drying deck.
How many gallons of stain do different deck sizes need?
| Deck | Deck area (sq ft) | Total to cover (sq ft) | Exact gallons | Buy (gallons) |
|---|---|---|---|---|
| 10 × 10 ft deck | 100 | 200 | 1 | 1 |
| 12 × 12 ft deck | 144 | 288 | 1.44 | 2 |
| 12 × 16 ft deck | 192 | 384 | 1.92 | 2 |
| 16 × 16 ft deck | 256 | 512 | 2.56 | 3 |
| 20 × 20 ft deck | 400 | 800 | 4 | 4 |
All rows: 2 coats, 200 sq ft per gallon, deck floor only — railings, steps and fascia boards are extra. Change any of them in the calculator above for your exact deck.
How much does it cost to stain a deck?
The stain is the main cost: multiply your gallons by the shelf price of the can you buy. One hands-on review found Behr Premium semi-transparent at $39 to $49.99 a gallon, so a 16 by 12 foot deck needing 2 gallons is roughly $78 to $100 of stain at that price — but check your own store, because prices vary by brand and region.
On top of the stain, budget for prep: deck cleaner and brightener, a brush or roller and tray, and tape for the house wall. Prep is what makes the stain stick, so clean the deck and let it dry fully before the first coat — staining a dirty or damp deck is how a new job starts peeling within a year.
Buying a 5-gallon pail instead of single gallons usually costs less per gallon, so it is worth pricing both ways when your deck needs 3 gallons or more. Keep the leftover stain labelled with the brand and colour for touch-ups later — a half-used can is far cheaper than a new one when a board needs a spot fix.
Embed this calculator on your site
Copy the code below and paste it into any page to embed this calculator.
What do people ask before starting this project?
How many gallons of stain do I need for a 16 by 12 foot deck?
A 16 by 12 foot deck is 192 square feet. Two coats at 200 square feet per gallon is 384 square feet to cover, which is 1.92 gallons, so buy 2 gallons. On rough weathered wood use 150 square feet per gallon instead, which needs 3 gallons. Smooth new wood at 250 needs 2 gallons.
How many coats of deck stain should I apply?
Two coats is the standard for a deck floor: the first coat soaks into the wood and the second builds even colour and protection. New wood under a year old takes one coat only, since it is still sealed with mill glaze and will not absorb a second. Check the label, because some products are made to be applied once.
Does the second coat of stain go further than the first?
Yes. The first coat fills the open fibres of bare wood, so the second coat lands on partly sealed wood and spreads further, typically 30 to 50 percent further on penetrating oil stains. This calculator counts every coat the same, which is deliberately conservative: expect a little stain left over rather than running short.
Do I need extra stain for railings and steps?
Yes. The deck floor is only part of the job. Railings, spindles, steps and fascia boards all take stain, and they add up fast because both sides of every board need coating. Measure each railing run separately: length times height, counted twice for the two faces, then add that area to the deck floor before dividing by coverage.
Where do the numbers come from?
- Deck stain calculator — semi-transparent oil-based stain covers 150 to 250 sq ft per gallon; second coat covers up to 50% farther — Deck Stain Help — coverage rates by stain type
- How much deck stain do I need — penetrating oil stain 150 to 250 sq ft per gallon on weathered wood, 250 to 400 on smooth new wood — The Honest Reviewers — coverage by wood condition
- Timber Pro coverage chart — older weathered decks 200 sq ft per gallon per coat, new decks 250 — Timber Pro — manufacturer coverage chart
What other DIY calculators are there?
- Paint calculator — the same coats-and-coverage maths for interior walls
- Fence calculator — how many posts, pickets, rails and bags of concrete for a fence
- DIY material calculators — the full list — one new calculator every day
See all of them on the DIY material calculators page — one new calculator every day.
More free calculators and generators: Fence calculator · Concrete slab calculator · Mulch calculator · Gravel driveway calculator · Tax set-aside calculator · Freelance rate calculator · Paint calculator · Tile calculator · Freelance platform fee calculator · Project quote calculator · Drywall calculator · Laminate flooring calculator · Concrete block calculator · Deck stain calculator · Hourly-to-salary converter · Fence stain calculator · Concrete mix calculator · Retainer rate calculator · Roofing shingle calculator · Siding calculator · Driveway sealer calculator · Insulation calculator · 1099 vs W-2 calculator · 1099 quarterly tax calculator · Brick calculator · Lumber calculator · Stair calculator · Freelance contract generator · Receipt maker · Late payment demand letter generator · Freelance NDA generator · Asphalt calculator · Wallpaper calculator · Freelance proposal generator · Vinyl plank flooring calculator · Gutter calculator · Freelance scope of work generator · Carpet calculator · Retaining wall calculator · Freelance timesheet calculator · Bulk gravel calculator · Sand calculator · Paver base calculator · Home office deduction calculator · Freelance mileage calculator · Solo 401(k) contribution calculator · Freelance quote generator · Freelance tax deductions calculator · Freelance platform comparison calculator · DIY checklist generator · Freelance rate by profession calculator · How to chase a late payment guide · Free invoice template library by trade · DIY project cost guides · How to write an invoice guide · Late fees in Virginia guide · Late fees in New Jersey guide · Late fees in Oregon guide · Late fees in the District of Columbia guide · Late fees in Mississippi guide · Late fees in Montana guide · Late fees in Nebraska guide · Late fees in Oklahoma guide · All DIY calculators